About Us
About Company
Professional and Expert Cold rooms - refrigerated trucks - thermal insulation systems Contractor
ESP was founded on 2015, we are professional and Expert in cooling and refrigeration Room & refrigerated trucks
- We manufacture cold rooms of all sizes from sandwich panels made of imported electrostatic painted metal sheet, and coated with plastic, 0.5 mm thick and injected with polyurethane, with a density of 42 kg/m3.
-We manufacture all kinds and sizes of stainless steel or fiberglass doors
-The rooms are assembled in interlock system or the Italian MTH system.
-All room accessories are fitted with Locking system.
We were able to create a proven track recod since we started our business in Egypt through our exceptional quality & competitve prices
All door openings are opened during manufacturing; the edges are covered with a layer of polyester reinforced with woven fiberglass, in addition to polyester corners reinforced with fiberglass to fully cover the foam to ensure the highest thermal insulation, the highest resistance to moisture and the best shape
Imported (PVC corners)
Aluminum corners (9*9) protector anti-collision
All electrical connections inside special pipes and are buried in the ceiling - The box is resistant to acids, chemicals and water.
Interior lights for steam and water, front and rear lights, above the trunk from the front and rear, and they are controlled from the driver's cabin.
The company guarantees the box and the unit for one year, against manufacturing defects. This guarantee does not apply to misuse or accidents.
The floor is insulated from the same panels that with external metal cladding Injected with polyurethane, on top of it a layer of wood with a thickness of 10 mm, then a layer of fiberglass reinforced with a layer of polyester. The helicopter concrete flooring finishing is being made and the aluminum checker plate top of the insulation layers (walls and ceiling) with a density of 42 kg/m3 and thickness (Poly urethane) Box sides and roof are insulated with polyurethane (the wall is 10 cm, covered with fiberglass from inside and outside).
The floor is 12 mm thick and covered with a layer of reinforced polyester (Marine plywood) which is moisture-resistant wood Birch wood, woven fiberglass reinforced which anti-slip and wear-resistant with beams of moisture-free wood specially imported from abroad in order to obtain the highest load and the lowest weight of the box
Prefabricated and made of polyester reinforced with fiberglass, and is isolated same as the walls.
The box is provided with special supports to install the unit The box conforms to the specifications of the environment in terms of manufacturing and international specifications and specifications of the International Agreement for Refrigerated Transport, especially perishable goods.
The floor is insulated with a layer of insumat 4 mm, and then a layer of thermal insulating blue cork, then a layer of thermal impermeable, then a layer of concrete casting, and finally a layer of sornaga tiles.
The floors, walls and ceilings are assembled in special assembly devices to reach the highest degree of accuracy. The box corners are characterized by a high degree of insulation and flexibility to withstand the vibrations generated by the car body on the road.
All door accessories are made of stainless steel. The doors are fitted with a 5 blade rubber seal. Doors with rubber stops The doors are provided with stainless steel hooks.
Hinges, grooves, and sills are installed in special places of the box door or walls of the box, and it is supported with iron under a cover of polyester reinforced with three layers of fiberglass.
About Us
We manufacture cold rooms of all sizes from sandwich panels made of imported electrostatic painted metal sheet, and coated with plastic, 0.5 mm thick and injected with polyurethane, with a density of 42 kg/m3.
Contact Us
Phone:
01283939367
01110664034
01280276624
Email: info@esppanels.com